Description of Rework/Troubleshooting Elmer Station
This station will contain facilities and skills for trouble-shooting builders' boards where they have failed one or more tests. Facilities at this station will include ESD protected cookie sheet, Panavise, lamp with magnification, good temperature controlled solder station, hot-air gun, tweezers, and a DMM.
This station will also have the spare parts junk box and (limited) club-supplied connection materials.
The Elmer will be available for consultation at builders' stations, as well.
Resources
Supplies
Item | Qty | Notes |
---|---|---|
Junque box/Spare parts | 1 | ( resistors, capacitors, LM78L05; 2N3904;2N3906) |
9V snap leads | 6 | (spares) |
RG-174 coiax 8' | 1 | |
stereo cables w/1.8" plug | 5 | (spares) |
stereo 1/8" jacks | 5 | (spares) |
flux removal spray/solution | 1 | () |
UNCOATED cookie sheet | 1 | (ESD protection) |
ground wire | 1 | (for grounding cookie sheeet) |
Tools
Item | Qty | Notes |
---|---|---|
anti static mat w/wrist strap | 1 | |
Panavise Jr | 1 | |
tweezers | 1 | |
.032" tip temperature controlled soldering iron | 1 | |
hot air gun | 1 | |
Magnifying lamp | 1 |
Instruments
Item | Qty | Notes |
---|---|---|
DMM | 1 |
Process
No defined process here. Elmer is prepared to react to the exceptions, trouble-shooting requirements, etc.
Build Stages Supported
Any stage.